33.download autocad 2004 bible

click here to download the book

32.IS code 2131 method for standard penetration test for soils

hello friends,
here is the link of the IS code 2131.
method for standard penetration test for soils.
right click on the link and then click save target as to save it to a desired location.
http://rishikesh1221.googlepages.com/2131.PDF

31.IS code 4434 of practice for in-situ vane shear test for soils

hello friends,
here is the link of the IS code 4434.
code of practice for in-situ vane shear test for soils
right click on the link and then click save target as to save it to a desired location.
http://rishikesh1221.googlepages.com/4434.PDF

30.IS code 4968 method for subsurfacing sounding for soils

hello friends,
here is the link of the is code 4968
it has three parts.
mthod for subsurfacing sounding for soils
right click on the link and then click save target as to save it to a desired location.
part 1(dynamic method using 50 cone wihout bentonite slurry)
http://rishikesh1221.googlepages.com/4968_1.PDF
part 2(dynamic method using cone and bentonite slurry)
http://rishikesh1221.googlepages.com/4968_2.PDF
part 3(static cone penetration test)
http://rishikesh1221.googlepages.com/4968_3.PDF

29.IS codes 1904 of practice for design and construction of foundations in solids:general requirement

hello friends,
here is the link of the IS code 1904
for subsurface investigation for foundation
right click on the link and then click save target as to save it to a desired location
http://rishikesh1221.googlepages.com/1904.PDF

28.IS CODES 1892 of practice for subsurface investigation for foundation

hello friends,

here is the link of the is code 1892

for subsurface investigation for foundation

right click on the link and then click save target as to save it to a desired location

http://rishikesh1221.googlepages.com/1892.pdf

27. Thrust Areas in Research

(a) Structural Engineering
1. Study of cable stayed bridges
2. Utilization of fly ash in blending cement
3. RC frame and brick masonry infill composite for residential buildings
4. Appropriate technology for low cost housing
5. Design of structural concrete using strut and tie model
6. Optimal design of structures
7. Reliability based design of structures
8. Fibre reinforced concrete
9. Plastic analysis of pile shafts and orthotropic plates
10. Yield line analysis of slabs
11. Reinforcement corrosion
12. Non linear dynamic analysis of Tension leg platforms
13. Non linear dynamic analysis of compliant structures under seismic loads
14. Retrofitting techniques for heritage structures
15. Seismic proximity study of high rise structures
16. Polymer concrete
17. Finite element applications in structural analysis an Design
18. Wind effects on structures (Cyclone resistant structures)
19. Bamboo applications in soil/ground improvement
(b) Hydraulic Engineering
1. Energy methods for the design of alluvial channels
2. System approach to water resources planning and management
3. Renewable energy utilization for River pollution management
( c) Soil Mechanics and Foundation Engineering
1. Shear strength of silty soil
2. Settlement and stress around pile foundations
3. Geo environmental studies
4. Bearing capacity of reinforced soil
5. Geo-synthetic applications
6. Pile foundations
(d) Geoinformatics
1. Airborne and space borne remote sensing
2. Geo informatics
3. Renewable energy utilization for River pollution management
(e)TransportationEngineering
1. Analysis and Design of Rigid Pavement
2. Fuzzy System Modeling and Airways
3. Construction Project Management with special focus on
Planning for Fast Track & Concurrent Engineering Projects.